Charger V6-2.7L VIN T (2007)
10. Remove the three 8 mm bolts (2) from the rear bin that secure the console to the floor panel transmission tunnel.
11. Remove the two screws (3) that secure the front of the console to the instrument panel.
12. Slide the console rearward far enough to access and disconnect the jumper wire connector (4) from the accessory power outlet on the underside of
the console.
13. If equipped, disconnect rear heated seat connector.
14. Remove the floor console from the vehicle.
Center Console Cover with DVD
1. Open console lid.
2. Remove side covers.
3. Remove six screws.
4. Remove console cover.
