Charger V6-2.7L VIN T (2007)
Hydraulic Control Assembly - Antilock Brakes: Overhaul
Disassembly
DISASSEMBLY
1. Remove two screws attaching the mounting bracket to the HCU. Remove the bracket.
2. Remove four screws (1) attaching ABM (2) to HCU.
3. Separate ABM (1) from HCU (2).
Assembly
ASSEMBLY
1. Clean any debris off the mating surfaces of the HCU and ABM.
CAUTION: When installing new O-rings or solenoid valve stem seals, do not use any type of lubricant.