Charger V6-2.7L VIN T (2007)
9. Route cable above rear crossmember, then slide cable end (1) (shown with connector) and housing (3) through equalizer (2) above rear axle
differential.
NOTE: Due to short travel and low spring tension, it is not necessary to lock-out parking brake lever to service parking brake
components.
10. Connect front parking brake cable (5) at connector (3) to right rear parking brake cable (4) (axle differential not shown).
11. Install screw (2) fastening cable (1) routing bracket to rear crossmember front flange (3).
