Charger V6-2.7L VIN T (2007)
12. Position lower rear wheelhouse shield (3) onto body of vehicle. Install nuts (1), bolt (2) and push-pins (4) securing lower rear wheelhouse shield to
body. Tighten nuts and bolt securely.
13. Lower vehicle until rear wheels are just above floor level.
14. Apply parking brake lever. Release lever, then reapply.
15. Check to make sure rear wheels will not rotate with lever applied.
16. Release parking brake lever, then check to make sure rear wheels rotate without excessive drag.
17. Apply parking brake lever.
18. Lower vehicle.
