Charger V6-2.7L VIN T (2007)
6. Remove crankshaft vibration damper.
7. Remove timing chain cover.
8. Remove timing chain.
9. Remove camshafts and rocker arms.
10. With air hose attached to spark plug adapter installed in the cylinder being serviced, apply 620.5-689 kPa (90-100 psi) air pressure. This is to hold
valves in place while servicing components.
11. Using Special Tool MD 998772A with adapter 6779, compress valve spring and remove valve locks, retainer, and valve spring.
12. Remove valve stem seal.
Off Vehicle
OFF VEHICLE
1. With cylinder head removed, compress valve springs (3) using a Special Tool C-3422-D, Valve Spring Compressor.
2. Remove valve retaining locks (1), valve spring retainers (2), valve springs (3).
In Vehicle
IN VEHICLE
