Charger V6-2.7L VIN T (2007)
Headlamp Switch: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
2. Remove steering column opening cover.
3. From underneath and behind the instrument panel, push up on the lower clip on headlamp switch then wiggle it down and out of instrument panel.
4. Disconnect the headlamp switch electrical connector.
