Charger V6-2.7L VIN T (2007)
If weather conditions are not a factor, the driver should examine the sensor. It may require cleaning or removal of an obstruction. The sensor is located
behind the grille, slightly offset from the center of the grille.
To keep the ACC System operating properly, it is important to note the following maintenance items:
-
Always keep the sensor clean. Carefully wipe the sensor lens with a soft cloth. Be cautious not to damage the sensor lens.
-
Do not remove any screws from the sensor or the sensor mount. Doing so could cause an ACC system malfunction or failure and require a sensor
re-alignment.
-
If the sensor is damaged due to an accident, see your authorized dealer for service.
-
Do not attach or install any accessories near the sensor, including transparent material, aftermarket grilles or installing a vehicle front-end
protector. Doing so could cause an ACC system failure or malfunction.
When the condition that deactivated the system is no longer present, the system will return to the "ACC Off" state and will resume function by simply
reactivating it.
NOTE: Installing a vehicle front-end protector or aftermarket grille or modifying the grille, attaching or install any accessories near the sensor is not
recommended. Doing so may block the sensor and inhibit ACC operation.
Service ACC Warning
If the system turns off, and the EVIC displays "SERVICE ACC", it indicates there is an internal system fault that requires service from an authorized
dealer.
Precautions While Driving with ACC
In certain driving situations, ACC may have detection issues. In these cases, ACC may brake late or unexpectedly. The driver needs to stay alert and may
need to intervene.
Offset Driving
ACC may not detect a vehicle in the same lane that is offset from your direct line of travel. There will not be sufficient distance to the vehicle ahead. The
offset vehicle may move in and out of the line of travel, which can cause your vehicle to brake or accelerate unexpectedly.
Turns and Bends
