Charger V6-2.7L VIN T (2007)
9. "This routine is used to align the ACC sensor. To properly align the system you must have the ACC sensor alignment board positioned properly.
Improper setup of the ACC alignment board will affect ACC performance. Press "Next" to continue or "Cancel" to exit."
10. "Performing rough alignment. Ensure the vertical alignment cover is installed on the alignment board, this covers both of the alignment's on the
aiming board. The horizontal adjustment screw is located on upper right corner of the ACC sensor. The vertical adjustment screw is located on the
lower left corner of the ACC sensor."
11. After rough alignment mode is complete: "Remove the vertical alignment cover. Press "Next" to continue."
12. "Performing fine alignment. Ensure the vertical alignment cover is removed from the alignment board. The horizontal adjustment screw is located
on upper right corner of the ACC sensor. The vertical adjustment screw is located on the lower left corner of the ACC sensor."
13. After fine alignment mode is complete: "Clearing internal compensation value."
