Charger V6-2.7L VIN T (2007)
Steering Column Cover: Service and Repair
Cover-Steering Column Opening
Removal
REMOVAL
1. Disconnect and isolate negative battery cable.
2. Remove the screws (2 and 6) that secure the steering column cover (1) to the instrument panel.
3. Pull the steering column cover rearward at the top and right side of the cover to release the snap retainers from the instrument panel.
4. Disconnect the wire harness connector (3) from the trunk release switch, if equipped.
5. Disconnect the release cable (4) from the emergency bracket release handle (5) and remove the steering column cover from the vehicle.
6. If required, remove the screws (3) that secure the instrument panel steering column cover reinforcement (1) to the bracket (2) and remove the
reinforcement from the vehicle.
Installation
