Charger V6-2.7L VIN T (2007)
2. Install outer tie rod end (5) into steering knuckle (2). Install and tighten nut (1) to 85 Nm (63 ft. lbs.).
3. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
4. Lower vehicle.
5. Perform wheel alignment setting toe to specifications.
6. Tighten tie rod jam nut (3) to 75 Nm (55 ft. lbs.).
Inner Tie Rod
INNER TIE ROD
NOTE: The travel restrictor (2) has a beveled lip (1) on one end of its inside diameter to keep the restrictor from being install too far onto the
