dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Arm|Front|Page 8592 > < Control Arm|Front|Page 8590
Page 22
background image

11.   Remove jack (3) from under rear axle differential.
12.   If previously lowered, raise rear exhaust back to mounted position and connect exhaust isolators at muffler and resonators hangers. Remove jack

or stand below exhaust muffler.

13.   If removed, install fuel filler tube.

14.   Lower vehicle until front tires contact floor but rear is still suspended. Place jack stands under each rear suspension spring link. Place an

appropriate wooden block between stand and link to avoid damaging spring link, then lower vehicle until full vehicle weight is supported by
suspension.

Control Arm|Front|Page 8592 > < Control Arm|Front|Page 8590