Charger V6-2.7L VIN T (2007)
11. Remove shock absorber (3) by tipping top outward and lifting lower end out of pocket in spring link (4).
Standard
STANDARD
1. Insert lower end of shock absorber (3) into well of spring link (4).
2. Raise upper end of shock absorber (4) up into mounted position on body (1) and install upper mounting screws (2). Tighten upper mounting
screws to 52 Nm (38 ft. lbs.).
3. Install lower shock mounting bolt (2) and nut (4). Do not tighten at this time.
4. Remove under-hoist utility jack or jack stand from under spring link.