Charger V6-2.7L VIN T (2007)
13. Unsnap and then remove the shifter indicator bezel (PRNDL) from the shifter assembly (Figure 3).
14. Disconnect the shifter assembly electrical connections.
15. Disconnect the transmission shift cable from the shifter assembly pivot pin.
16. Disconnect the shift interlock cable from the shifter assembly.
17. Remove and save the four shifter assembly mounting nuts.
18. Disengage the carpet push pin on the left side of the shifter.
19. Remove the shifter assembly from the vehicle.
20. Partially separate the upper shifter housing from the lower shifter housing by prying on the three retaining tabs (Figure 4).
21. Disconnect the electrical connector located inside the shifter assembly.
