Charger V6-3.5L (2009)
Power Seat Switch: Service and Repair
Power Seat Switch - Installation
INSTALLATION
NOTE: Left side shown. Right side similar.
1. Position the power seat switch (3) to the seat cushion side trim panel (1) and engage the four retaining tabs (2 and 4). Make sure the retaining tabs
are fully engaged.
2. Connect the electrical connector (5) to the power seat switch.
3. Reposition the seat cushion side trim panel and install the three screws. Tighten the screws securely.
4. Reconnect the negative battery cable.
