Charger V6-3.5L (2009)
1. With the 40% seat back removed.
2. Place 60% seat back (2) into position on the studs.
3. Fold the 60% section of the seat down.
4. Install the four nuts (1) and (3) attaching seat back (2). Tighten nuts to 57 Nm (42 ft. lbs.).
60/40 SEAT BACK DOMESTIC SEDAN
40% SEAT BACK SIDE
1. Place the 40% section (3) into position.
2. Slide 40% seat back onto the pivot pin (1) located on the 60% seat back (2).
3. Install the two nuts (5) attaching seat back. Tighten nuts to 57 Nm (42 ft. lbs.).
60/40 SEAT BACK EXPORT SEDAN
60% SEAT BACK SIDE