Charger V6-3.5L (2009)
Seat Cover: Service and Repair
Seat Cushion Cover - Installation
Front
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions. See: Service Precautions
2. Position the cushion cover and foam over the seat pan and connect the j-straps (1 AND 2).
3. Position the seat cushion assembly onto the seat frame and install the clamps (1).
4. Connect the wire harness to the seat cushion pan, if equipped.
5. Install the bolts (2) and tighten to 10 Nm (90 in. lbs.).
6. Connect battery negative cable.
Second Row
INSTALLATION
1. Install hog rings attaching cushion support, if remove.
