Charger V6-3.5L (2009)
5. Compress valve springs (4) with valve spring compressor C-3422-D and adapter 6526A See: Tools and Equipment, install locks (2) and release
tool.
6. If valves (1) and/or seats are refaced, measure the installed height of springs. Measurements are taken from top of spring (4) seat to the bottom
surface of spring retainer. If height is greater than 38.75 mm (1.5256 in.), install a 0.762 mm (0.030 in.) spacer in head counterbore under the
valve spring seat to bring spring height back within specification.
