Charger V6-3.5L (2009)
CAUTION: Do not pry between the clutch plate and the pulley and bearing assembly to remove the clutch plate from the compressor shaft as
this may damage the clutch plate.
NOTE: Use care not to lose any clutch shim(s) during removal of the clutch plate, as they may be reused during the clutch plate installation
process.
8. Tap the clutch plate (2) lightly with a plastic mallet to release it from the splines on the compressor shaft (1) and remove the clutch plate and
shim(s) (3).
9. Using A/C Snap Ring Pliers 9764 (1) or equivalent, remove the snap ring (2) that secures the pulley and bearing assembly (3) to the front of the
A/C compressor and remove the pulley and bearing assembly.