Charger V6-3.5L (2009)
4. 3.5L Engine - Unthread tube nut, then remove pressure hose (2) from pump (1).
5. 5.7L/6.1L Engine - Unthread tube nut, then remove pressure hose (2) from pump (1).
6. Raise and support vehicle. See: Vehicle Lifting/Service and Repair
7. Remove belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Removal
8. Remove screw fastening pressure hose routing clamp (1) to front of engine cradle (2).
9. Remove screw fastening pressure hose routing clamp to left side of engine cradle.
