dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel Pump Module - Removal|Page 3562 > < Fuel Pump Module - Removal|Page 3560
Page 11
background image

16. Lift level sending card straight up and out of module.

17. Disconnect the electrical wiring from module.
18. Remove level sending card.

Right Side Module - Removal

RIGHT SIDE MODULE

1. Release the fuel pressure, refer to the Fuel Pressure Release Procedure  See: Fuel Delivery and Air Induction/Fuel Filter/Fuel Pressure

Release/Service and Repair.

2. Disconnect negative battery cable.

NOTE: The fuel level of the vehicle must be below 5/8 of a tank before you remove the module lock-rings. If it is above that you can spill fuel

in the vehicle.

Fuel Pump Module - Removal|Page 3562 > < Fuel Pump Module - Removal|Page 3560