dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wireless Ignition Node Receiver - Removal|Page 3057 > < Wireless Ignition Node Receiver - Removal|Page 3055
Page 4
background image

2. Remove the lower steering column trim cover and steering column cover reinforcement See: Body and Frame/Interior Moulding / Trim/Dashboard

/ Instrument Panel/Service and Repair/Steering Column Opening Cover - Removal 

3. Remove the two screws (1) from the lower instrument cluster trim.

4. Using a trim stick or equivalent, gently pry (1) along the edge of the trim to remove the instrument cluster trim.

5. Remove the 4 screws from the WIN (1).

6. Remove the WIN (1) from the rear if the instrument panel bringing it through the opening below the steering column and disconnect the electrical

connector (2) from the WIN.

Wireless Ignition Node Receiver - Removal|Page 3057 > < Wireless Ignition Node Receiver - Removal|Page 3055