Charger V6-3.5L (2009)
Seat Heater Control Module: Description and Operation
Heated Seat Module - Operation
OPERATION
The heated seat module operates on fused battery current received from the ignition switch. The module is grounded to the body at all times through the
electrical connector. Inputs to the module include Controller Area Network (CAN) data bus messages and standard hardwired 12volt power and ground.
In response to the CAN inputs the heated seat module will control the battery current to the appropriate heated seat elements.
When a heated seat switch CAN data bus signal is received by the heated seat module, the module energizes the selected heated seat element. The Low
heat set point is about 38° C (100.4° F), and the High heat set point is about 42° C (107.6° F).
If the heated seat module detects a heated seat element OPEN or SHORT circuit, it will record and store the appropriate diagnostic trouble code (DTC).
