Charger V6-3.5L (2009)
Steering Mounted Controls Communication Module: Description and Operation
Steering Column Module - Description
DESCRIPTION
WARNING: To service any component of the SCCM, the entire assembly must be removed from the column. This must be done due to the
clockspring passing through the assembly and into the self docking connector. Failure to remove the assembly could damage the
pins of the clockspring and prevent the airbag system from operating properly.
The Steering Control Module (SCM) is the module located in the bottom of the Steering Column Control Module (SCCM), retained by three screws, and
is the mating point for all the switches (steering angle sensor, tilt/telescopic switch, multi-function switch, clockspring) located in the SCCM. The
steering wheel switches, horn, speed control switches, attach to the steering wheel and interface to the SCM through the SCCM. The SCM is screwed
directly to the bottom of the multi-function switch. All the other switches are mounted on top of the multi-function switch.
