Charger V6-3.5L (2009)
2. Place the passenger airbag into the cavity of the passenger airbag door.
3. Install the two passenger airbag mounting bolts (2) to the crosscar beam. Torque bolts to 11.6 Nm (103 in. lbs.).
4. Connect the passenger airbag electrical connector (3).
5. Install the two inboard mounting screws (2) to the passenger airbag just below the distribution duct (1) and to the left of the distribution housing.
Torque screws to 2.8 Nm (25 in. lbs.).
