Charger V6-3.5L (2009)
C-PILLAR MOUNTED SIDE IMPACT SENSOR
1. Position the C-pillar mounted impact sensor in the correct mounting location and install the two mounting screws (2). Torque screws (2) to 7 Nm
(62 in. lbs.).
2. Connect the electrical connector (3).
3. Install the C-pillar trim panel See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/C-Pillar Trim
Panel-Installation.
WARNING: Do not connect the battery negative cable See: Testing and Inspection/Component Tests and General Diagnostics . Personal injury or
death may result if the system test is not performed first.