Charger V6-3.5L (2009)
Seat Heater Switch: Service and Repair
Heated Seat Switch - Installation
Rear
INSTALLATION
1. Align the tabs (1) of the switch/module (2) to the bezel and gently push together until the tabs are securely in place.
2. Connect the switch/module electrical connectors (2) and (4).
3. Gently push the heated seat switch/module bezel (1) into the mounting hole in the center console until it is securely in place.
4. Connect the battery negative cable.
5. Verify heated seat system operation.
Front
INSTALLATION