Charger V6-3.5L (2009)
7. Install the gear shift lever See: Steering and Suspension/Steering/Steering Column/Service and Repair/Lever, Gearshift - Installation.
8. Install the steering column opening cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Steering Column Opening Cover - Installation.
9. Connect the negative battery cable. It is important that this is performed properly (including calibration of steering angle sensor if equipped with
ESP) See: Starting and Charging/Battery/Service and Repair/Procedures/Battery Reconnection.
10. Perform the Wireless Ignition Node (WIN) initialization procedure whenever the WIN or shaft lock module is replaced on vehicles equipped with
the shaft lock module.
Floor Shift
FLOOR SHIFTER
NOTE: The WIN initialization procedure is required whenever the WIN or shaft lock module is replaced on vehicles equipped with the shaft
lock module.
