dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Battery Cables - Removal|Page 6103 > < Battery Cables - Removal|Page 6101
Page 3
background image

5. Remove the Power Distribution Center (PDC) cover (2).
6. Remove the battery positive cable to the rear PDC fastener (3).

7. One at a time, free the battery positive cable from the routing clips located in the rear compartment area.

8. Remove the right, front seat, See: Body and Frame/Seats/Service and Repair/Seat, Front/Seat - Removal.
9. Remove the right, rear seat cushion. Pull upward at forward edge of each retainer loop of the rear seat cushion to disengage retainer loops from

cups in floor.

10. Remove the right, front and rear door sill trim panels.
11. Remove the right, B - pillar lower trim panel, See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Pillar Trim/B-Pillar

Trim Panel-Removal.

12. Position carpet aside to gain access to the battery positive cable.

13. One at a time, free the battery positive cable from the routing clips located in the rear seat area.

Battery Cables - Removal|Page 6103 > < Battery Cables - Removal|Page 6101