Charger V6-3.5L (2009)
CAUTION: Do not twist the inner tie rod-to-steering gear boots during front wheel Toe adjustment. Remove the boot clamps (2) at the inner
tie rods and make sure the boots move freely on the inner tie rods.
1. AWD - Loosen the jam nut (1) at the inner-to-outer tie rod (3-4) connection.
2. RWD - Loosen the jam nut (3) at the inner-to-outer tie rod (4-5) connection.
3. Grasp the inner tie rod at the hex and rotate as necessary to adjust front toe to the preferred toe specification. See: Specifications/Wheel Alignment
Specifications