dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Wheel Alignment|Page 6723 > < Wheel Alignment|Page 6721
Page 9
background image

4. AWD - Tighten the tie rod jam nut (3) to 75 Nm (55 ft. lbs.) using care not to lose adjustment.

5. RWD - Tighten the tie rod jam nut (3) to 75 Nm (55 ft. lbs.) using care not to lose adjustment.
6. Make sure the inner tie rod-to-steering gear boot is not twisted, then reinstall the boot clamp at the inner tie rod.
7. Adjust front toe on opposite side of vehicle using the above procedure as necessary.

Wheel Alignment|Page 6723 > < Wheel Alignment|Page 6721