Charger V6-3.5L (2009)
Power Steering Fluid Reservoir: Service and Repair
Reservoir, Power Steering Pump - Installation
INSTALLATION
1. Install reservoir (2) on coolant bottle (4) by sliding it into guide and allowing it to lock into place.
2. Install return hose (1) on reservoir hose fitting. Install clamp securing hose in place.
3. Install supply hose (3) on reservoir hose fitting. Install clamp securing hose in place.
4. Install air cleaner housing and inlet tube. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Air Cleaner Body - Installation
5. Connect battery negative cable (2) to battery post. It is important that this is performed properly. See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery Reconnection
6. Fill and bleed power steering system. See: Service and Repair/Power Steering System Bleeding