Charger V6-3.5L (2009)
8. Remove return hose (1) from routing clip (2) on cooling module.
9. Remove return hose from vehicle.
Return Hose - Cooler to Reservoir
COOLER TO RESERVOIR
1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throttle body. See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance
Checks/Air Cleaner Housing/Service and Repair/Air Cleaner Body - Removal
