Charger V6-3.5L (2009)
5. Tighten return hose tube nut at steering gear to 47 Nm (35 ft. lbs.) torque.
6. Route cooler end of return hose (1) under headlamp mounting crossmember (3) as shown.
7. Place hose in routing clip (2) on cooling module.
8. Slide return hose (1) onto end of cooler (2). Install clamp securing hose in place.
9. Install belly pan. See: Body and Frame/Exterior Moulding / Trim/Underbody Cover/Service and Repair/Belly Pan - Installation
10. Lower vehicle.
