Charger V6-3.5L (2009)
CAUTION: Prior to coupling installation, make sure gear is centered in its travel to match clockspring centering in steering column.
7. Align coupling (2) with input shaft (3) and install steering coupling. Install NEW pinch bolt. Tighten bolt to 54 Nm (40 ft. lbs.).
8. Install each outer tie rod end (5) to its knuckle (2). Install nuts (1) and tighten to 85 Nm (63 ft. lbs.).
9. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)). See: Wheels and
Tires/Service and Repair/Removal and Replacement/Tires and Wheels - Installation
10. Lower vehicle.
