Charger V6-3.5L (2009)
WARNING: To service any component of the SCCM, the entire assembly must be removed from the column. This must be done due to the
clockspring passing through the assembly and into the self docking connector. Failure to remove the assembly could damage the
pins of the clockspring and prevent the airbag system from operating properly.
1. Install the SCCM (1) onto the steering column.
2. Tighten the set screw (1) securing the SCCM (2).
3. Tighten clockspring screw(s) (1) that were backed out to keep the clockspring from unwinding.
