Charger V6-3.5L (2009)
Repair/Procedures/Battery Reconnection
47. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
48. Position vehicle on alignment rack/drive-on lift. Raise vehicle as necessary to access mounting bolts.
49. Tighten shock absorber lower mounting bolt nuts (4) to 72 Nm (53 ft. lbs.).
50. Tighten compression link bolt and nut (1) at crossmember to 85 Nm (63 ft. lbs.).
51. Perform wheel alignment, paying special attention to thrust angle. If rear crossmember needs to be shifted to align thrust angle, try to avoid
compromising tension link clearance (Refer to 23 ). See: Alignment/Service and Repair
Rear Mount
INSTALLATION
CAUTION: It is very important that bushing be installed in same position as original to maintain vehicle ride quality and bushing longevity.
That is why bushing, once installed, needs to closely match reference marks applied upon removal of original bushing.
