dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

NAG1 Automatic Transmission|Page 4581 > < NAG1 Automatic Transmission|Page 4579
Page 3
background image

TRANSMISSION FILL

To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:

1. Verify that the vehicle is parked on a level surface.
2. Remove the dipstick tube cap.
3. Add following initial quantity of Mopar(R) ATF +4, Automatic Transmission Fluid, to the transmission:

a. If only fluid and filter were changed, add 5.0 L (10.6pts.) of transmission fluid to transmission.
b. If the transmission was completely overhauled or the torque converter was replaced or drained, add 7.7 L (16.3 pts.) of transmission fluid to

transmission.

4. Check the transmission fluid . See: Fluid/Filter Service

NAG1 Automatic Transmission|Page 4581 > < NAG1 Automatic Transmission|Page 4579