Charger V6-3.5L (2009)
19. Using an assistant, position the backlite (2) over the backlite opening.
20. Using the grease pencil marks or tape as reference points, align the backlite to the opening.
21. Carefully lower the backlite onto the backlite fence (3). Guide the backlite and the rubber seal (1) around the backlite into its proper location.
CAUTION: It is not possible to move the backlite after installation. The backlite should never be pressed into place by more than one person,
because the backlite can break if pressed simultaneously on both sides.
22. Push the backlite inward until the backlite comes into contact with the spacers located on each side of the backlite fence.
23. Connect the wire connectors to the rear window defogger terminals and, rear window mounted radio antenna, if equipped.
24. Install the trim panel to the rear shelf See: Body and Frame/Interior Moulding / Trim/Rear Shelf/Service and Repair/Rear Shelf Panel - Installation
.
25. Install the quarter trim panels .
