Charger V6-3.5L VIN G (2006)
Rear Door Exterior Handle: Service and Repair
EXTERIOR HANDLE
REMOVAL
1. Remove the trim panel from the inside of the rear door.
2. Remove the watershield from the inside of the rear door. Refer to Rear Door Panel.
3. Remove the door glass channel and bracket from the inside of the rear door. Refer to Window Track.
4. Remove the latch from the inside of the rear door.
5. Remove the three screws (2) from the inside of the door that secure that exterior handle (1) to the door.
6. Remove the handle from the outside of the door.
INSTALLATION
1. Position the exterior handle (1) to the mounting holes on the outside of the door.
2. From the inside of the door, install and tighten the three screws (2) that secure that exterior handle to the door. Tighten the screws to 5 N.m (44
in.lbs.).
3. Reinstall the latch to the inside of the rear door.
4. Reinstall the door glass channel and bracket to the inside of the rear door. Refer to Window Track.
5. Reinstall the watershield onto the inside of the rear door.
6. Reinstall the trim panel onto the inside of the rear door.
