Charger V6-35L VIN G (2006) Rear Door Latch System Information
NOTE: Wiring connector can be disconnected much easier after all links are disconnected from latch and latch is unscrewed from door.
9. Reach into the back of the door shell (3) and pull the latch forward far enough to access and disconnect the door wire harness connector (1) from
the front door latch (2).
10. Remove the latch from the interior of the door shell.
INSTALLATION
NOTE: Wiring connector can be connected much easier with all links disconnected from latch and latch is unscrewed from door.
1. Connect the door wire harness connector (1) to the door latch (2).
