Charger V6-3.5L VIN G (2006)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Decklid Cover
COVER
REMOVAL
1. Open the deck lid.
2. Remove the four push-pin fasteners (4) that secure the latch cover (1) to the deck lid inner panel (3).
3. Disengage the emergency latch release T-handle from the cover.
4. Remove the cover from the deck lid inner panel.
INSTALLATION
1. Position the latch cover (1) over the latch on the deck lid inner panel (3).
2. Engage the emergency latch release T-handle through the slit in the cover.
3. Align the mounting holes in the cover to the holes in the deck lid inner panel.
4. Install the four push-pin fasteners that secure the cover to the deck lid.
5. Close the deck lid.