Charger V6-3.5L VIN G (2006)
Trunk / Liftgate Striker: Service and Repair
LATCH STRIKER
REMOVAL
1. Open the deck lid.
2. Remove the trunk rear trim panel from the inside of the deck opening lower panel (3). Refer to Trim Panel.
3. Mark the deck lid latch striker (2) location on the inside of the deck opening lower panel to aid reinstallation.
4. Remove the two screws (1) that secure the latch striker to the inside of the deck opening lower panel.
5. Remove the latch striker from the vehicle.
INSTALLATION
1. Position the deck lid latch striker (2) to the inside of the deck opening lower panel (3).
2. Install and tighten the two screws (1) that secure the latch striker to the deck opening lower panel. Tighten the screws to 28 N.m (21 ft.lbs.).
3. Adjust the latch striker position as necessary to achieve proper deck lid latch operation.
4. Reinstall the trunk rear trim panel to the deck opening lower panel.
5. Close the deck lid.
