Charger V6-3.5L VIN G (2006)
Spoiler: Service and Repair
SPOILER
REMOVAL
1. Disconnect and isolate the negative battery cable.
2. Remove the lift gate upper trim panel.
3. Disconnect the rear washer fluid supply hose (1).
4. Disconnect the CHMSL wire harness connector (2).
5. Remove the nuts (3) that secure the rear spoiler to the liftgate (4).
6. Partially remove the rear spoiler (1) from the lift-gate to access the wire harness and washer fluid supply hose (2).
7. Remove the rubber grommet from the right top of the lift gate and route the wire harness and washer supply hose through the opening in the
liftgate.
8. Remove rear spoiler from the vehicle.
INSTALLATION