Charger V6-3.5L VIN G (2006)
7. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
8. Lower vehicle.
9. Pump brake pedal several times to ensure vehicle has a firm brake pedal before moving vehicle.
10. Check and adjust brake fluid level in reservoir (1) as necessary.
CAUTION: If NEW brake rotors or pads have been installed, keep in mind that braking effectiveness might be somewhat reduced during the first
brake applications following installation.
11. Road test vehicle and make several stops to wear off any foreign material on brakes and to seat brake shoes.
REAR
NOTE: Inspect disc brake pads and parking brake shoes before installation.
