Charger V6-3.5L VIN G (2006)
Water Pump: Service and Repair
WATER PUMP
REMOVAL
The water pump on all models can be replaced without discharging the air conditioning system.
WARNING: DO NOT REMOVE PRESSURE CAP WITH THE SYSTEM HOT AND UNDER PRESSURE BECAUSE SERIOUS BURNS
FROM COOLANT CAN OCCUR.
1. Drain cooling system.
2. Remove accessory drive belts.
NOTE: The water pump is driven by the timing belt.
3. Remove engine timing belt.
4. Remove water pump mounting bolts (1). Note position of longer bolts for proper re-installation.
5. Remove water pump body (1) from engine.
INSTALLATION
1. Clean all O-ring surfaces on front cover.
2. Position water pump (3) and O-ring to engine.
3. Install mounting bolts. Tighten to 12 Nm (105 inch lbs.).
4. Install timing belt.
5. Install accessory drive belts.
6. Fill cooling system.