Charger V6-3.5L VIN G (2006)
c.
Remove the right and left vehicle speed sensors from the steering knuckle (Figure 1).
d.
Remove the right and left upper control arm ball joint bolt and separate the steering knuckle from the upper control arm (Figure 2).
e.
Remove the right and left brake calipers. Set them aside.
CAUTION:
Do not let the calipers hang by the brake hose.
f.
Remove the right and left brake pads and set them aside for reuse.
g.
Remove the right and left hub nuts holding the right and left axle shafts to the hubs.
h.
Remove the right and left sway bar link bolts to the strut clevis brackets and locate the sway bar and links away from the lower control arm
(Figure 2).
i.
Separate the left axle shaft from the steering knuckle.
j.
Separate left axle shaft from the differential extension housing.
k.
Remove the left axle shaft from the vehicle.
l.
Remove the left tie-rod end from the steering knuckle.
m.
Remove the left strut to lower control arm bolt and separate the strut from the arm.