Charger V6-3.5L VIN G (2006)
1. Measure clearance of piston rings to the cylinder bore and piston.
The No. 1 and No. 2 piston rings have a different cross section. Insure that which ever design No. 2 ring is installed, it is installed with
manufacturers I.D. mark (dot) facing up, towards top of the piston.
CAUTION: Install piston rings in the following order:
-
Oil ring expander.
-
Lower oil control ring side rail.
-
Upper oil control ring side rail.
-
No. 2 Intermediate piston ring.
-
No. 1 Upper piston ring.
2. Install the side rail by placing one end between the piston ring groove and the spacer. Hold end firmly and press down the portion to be installed
until side rail is in position. Do not use a piston ring expander tool during this step.
3. Install lower side rail first and then the upper side rail.
The No. 1 and No. 2 piston rings have a different cross section. Insure that which ever design No. 2 ring is installed, it is installed with
