Charger V6-3.5L VIN G (2006)
10. Install the torque converter access cover (1) and tighten the fastener (2) to 11 Nm (97 inch lbs.).
11. Install the engine oil cooler and new oil filter.
12. Support the engine with a jack stand.
13. Install the front drive axle housing (3). Tighten mounting bolts to oil pan to 65 Nm (48 ft. lbs.).
14. Remove the jack stand.
15. Install the front drive axle housing support bracket M.
16. Install the front suspension sway bar to cradle.
17. Install the engine mount to front cradle fasteners. Tighten the fasteners to 75 Nm (55 ft. lbs.).
18. Position and install the power steering hose to cradle hold downs.
19. Install the right catalytic converter.
