Charger V6-3.5L VIN G (2006)
1. Position the A/C-heater control (2) into the instrument panel center bezel (3).
2. Install the four screws (1) that secure the A/C heater control to the instrument panel center bezel. Tighten the screws to 2 N.m (17 in. lbs.).
3. Connect the wire harness connector(s) (3) to the A/C-heater control (4) and install the instrument panel center bezel (1) to the instrument panel (2).
4. Reconnect the negative battery cable.
