Charger V6-3.5L VIN G (2006)
13. If equipped with dual zone heating-A/C, remove the blend door cam (1) from blend door lever (2) and the pivot shaft located on the passenger side
of the air distribution housing (3).
14. Remove the six screws (1) that secure the front floor distribution duct (2) to the bottom of the air distribution housing (3) and remove the duct.
15. Carefully cut the foam seal (1) along the parting line (2) of the two halves of the air distribution housing (3). If the seal is deformed or damaged, it
must be replaced.
16. Remove the screws (4) that secure the two halves of the air distribution housing together.
